Quality

Your current location : Home >> Quality
According to the following drawings, we may accept exchange the chisels, such as the raw materials and the heat-treatment affect the quality during the operation. However, we will not be responsible for any other damages and worns.

A. Moil & Conical point: We do not compensate for rupture caused by worn of over 100mm from point of chisel(As shown in Drawing 1).
B. Wedge point: Moil & Conical point: We do not compensate for rupture caused by worn of over 100mm from point of chisel(As shown in Drawing 2).
C. Ball-headed & Blunt point: Moil & Conical point: We do not compensate for rupture caused by worn of over 100mm from point of chisel(As shown in Drawing 3).





Copyright © 2006-2018 Jiangyin Shiyou Engineering Machine Co.,Ltd.